Jacks, cranes TOR DG, DU, Screw-Jack, etc.

HYDRAULIC JACKS

Jacks DG – from their automotive counterparts are more reliable and durable. They are recommended for use at facilities with low and medium intensity of work. Lifting of the load is performed by pendulum movements of the lever. They are used only in an upright position.

Hydraulic bottle jacks of DHT are equipped with a telescopic rod, which allows lifting the load to a greater height in comparison with the traditional model of DHT. They are recommended for use at facilities with low and medium intensity of work.

Hydraulic NM jack - designed for use in industrial enterprises and construction sites.
Advantages: long lever (convenience and productivity), two working platforms (upper and lower), rotates 360 gr. (the ability to rotate the load), high accuracy of cargo positioning, high reliability, overload protection.

HHYG hydraulic jacks are powerful, reliable and productive hydraulic jacks with a load capacity of up to 200 tons. Designed for use in industrial enterprises and construction sites.

• DG and DHT. Technical specifications.
• HM. Technical specifications.
• HHYG and HHYG-S. Technical specifications.

RACK AND PINION JACKS

Universal rack-and-pinion jacks of DR and DRN types (with low pick-up) are distinguished by high quality materials and workmanship, while more than affordable.
The design of the jacks allows lifting the load both from the upper (main) working platform and with the help of the lower lifting device (paws).
The DRN model has the ability to pick up cargo from a height of 30 mm. It is allowed to operate in both vertical and horizontal planes.

The SJM rack and pinion jack belongs to the economy class equipment and has a simpler design relative to the type of DR. The SJM jack is equipped with a ratchet locking mechanism that works only in lifting mode. After lifting the load, it is necessary to install supports under the load, after which you can move the ratchet dog to a neutral position and lower the jack pad

The MJW rack and pinion jack is usually used as a unit designed to move parts of large equipment (covers, dampers, trolleys, platforms, etc.). Operation is allowed both in the vertical and horizontal plane.

The Hi-Jack jack is structurally different from most rack and pinion jacks. To raise/lower the load with a Hi Jack jack, it is necessary to perform pendulum movements of the lever, while most rack-and-pinion jacks rotate the handle.

• DR and DRN. Technical specifications.
• SJM. Technical specifications.
• MJW. Technical specifications.
• Hi-Jack. Technical specifications.

Screw jack Screw-Jack is a universal mechanical jack for working with loads up to 100 tons. The Screw-Jack jack is characterized by high reliability and ease of operation. The jack design allows lifting/lowering of the load both by rotation and by means of pendulum movements of the handle. It is allowed to operate in both vertical and horizontal planes.

• Screw-Jack. Technical specifications.

MANUAL CRANES

The TL hydraulic hand crane is widely used in car repair shops and services, as well as in industrial enterprises for the installation/dismantling of various dimensional equipment and aggregates, for example, engines. The TL crane is available in two versions: TL 1000 with an integrated pump and TL 1100 with an external foot pump.

The SB manual gantry crane is used mainly at industrial and construction facilities that are not equipped with stationary monorail tracks for lifting and moving loads up to 2 tons in weight. A hoist (usually a manual chain mobile) of the appropriate lifting capacity is installed on the crane.

• TL. Technical specifications.
• SB. Technical specifications.

The end beam is an element of a beam-type crane, is attached to the ends of the crane (span) beam, provides movement of the crane (span) beam along the monorail.

• Suspended and support beams. Technical specifications.

Price list